Art gallery · St Albans
ISO-Therm internal wall insulation to an art gallery
- Agreed approach
- ISO-Therm internal wall insulation installed throughout the gallery, fitted from scaffold and finished ready for decoration.
town in Northamptonshire · NN17, NN18
Damp and Mould Specialists Serving Corby
Procure Group Ltd investigates damp, mould and condensation across Corby, working for homeowners, property owners throughout the town's estates and newer developments.
Highly Rated by Customers.Trusted to Protect Your Home.
What we investigate
Damp and mould concerns we investigate in Corby
Any one of these symptoms can have several different causes, and the right remedy depends entirely on which one it is. That is what a survey establishes.
Damp patches and tide marks
Staining at low level or around a specific point on a wall or ceiling.
Mould growth
Black, green or grey growth on walls, ceilings, sealant, window reveals or behind furniture.
Musty odours
A persistent smell, often in a cupboard, wardrobe or unused room, sometimes before anything is visible.
Peeling paint and damaged plaster
Blistering, salting, crumbling plaster or wallpaper lifting away from the wall.
Condensation on windows
Water on glass and frames in the morning, and mould appearing on cold surfaces.
Water penetration
Damp appearing during or after rain, frequently linked to rainwater goods or pointing.
Suspected rising damp
Low-level dampness that may be rising damp, or may be one of several other causes.
Timber decay and woodworm
Soft or crumbling timber, fungal growth, exit holes or springy floors.
Leaks and escapes of water
Plumbing, heating or drainage leaks that show up some distance from the source.
Restricted air movement and cold surfaces
Rooms that feel humid, cold spots at reveals and lintels, and extract fans that do not clear steam.
Below-ground wall moisture
Damp, salting or water ingress at or just below external ground level.
We do not diagnose rising damp from photographs or from a single meter reading, and we do not assume that every damp problem needs chemical damp proofing. A great many do not.
What we are asked for
The work we are called out for in Corby
Each of these is a different problem with a different remedy. Which one applies depends on what the readings and the building show.
Damp surveys in Corby
An evidence-led investigation of what is making the wall wet, with readings and findings you can act on.
Damp proofing in Corby
Where a damp-proof course has genuinely failed, the appropriate remedial specification for the wall in question.
Mould removal in Corby
Professional remediation of the contamination, and control of the moisture conditions behind it.
Condensation control in Corby
Humidity, ventilation and surface temperature measured before any equipment is recommended.
Below-ground damp protection in Corby
Damp at or just below external ground level investigated, with localised protection where remediation calls for it. We do not install basement or cellar waterproofing.
Services
Damp, mould, timber and below-ground damp protection in Corby
Each service below links to the full national service page, where the investigation, the treatment options and the circumstances in which it is not appropriate are set out in detail.
Damp
Damp investigations
A structured investigation to establish the likely cause of dampness before any remedial work is recommended.
Damp
Rising damp assessments
Careful assessment of low-level dampness, which is frequently caused by something other than rising damp.
Damp
Penetrating damp investigations
Investigation of moisture entering through walls, roofs, openings and rainwater goods.
Surveys
Specialist damp surveys
Mould & condensation
Condensation control
Assessment of moisture production, ventilation, heating and insulation to reduce surface condensation.
Mould & condensation
Mould remediation
Treating the mould is only part of the solution. We investigate why it developed in the first place, then remediate the contamination and control the conditions that caused it.
Timber
Timber preservation
Assessment and treatment of structural timbers affected by moisture, decay or insect attack.
Timber
Woodworm investigations and treatment
Establishing whether insect activity is current before recommending any treatment.
Timber
Wet rot investigation and repairs
Identifying and repairing timber decay caused by sustained high moisture content.
Timber
Dry rot investigations
Careful investigation of suspected dry rot, which can extend beyond visibly damp timber.
Repairs & finishes
Damp-resistant plastering
Replastering specifications appropriate to walls affected by dampness or salt contamination.
Repairs & finishes
External damp-related repairs
Repairs to the external fabric that address the source of moisture entry.
Repairs & finishes
Water-damage reinstatement
Drying, repair and reinstatement following leaks, escapes of water or flooding.
Repairs & finishes
Internal wall insulation
Insulation of solid walls with careful attention to moisture risk and detailing.
Our work
Damp, mould and timber work around Corby
Photographs from Procure Group projects. Work of this kind is carried out across the area, so none is presented as a property at a particular address unless the caption says so.
Local property context
Property and moisture in Corby
Different construction types behave differently when they get wet, so the approach is matched to the building in front of us.
Corby expanded dramatically as a designated new town from the 1950s onwards, and a large share of its housing dates from that programme. Housing of this era typically has early cavity walls, larger glazed areas and airflow provision designed for a very different heating regime — which is precisely why condensation and cold-bridge mould are such frequent findings once windows and insulation have been upgraded.
Since the 2000s the town has seen substantial new development, bringing much more airtight construction and reliance on mechanical extraction. When those systems underperform or are switched off, humidity rises quickly, and the resulting mould is often mistaken for a structural damp problem.
Our approach
What happens during your survey in Corby
The purpose of a survey is to identify the underlying cause of the moisture, not to justify a particular treatment.
- 1Your enquiryYou tell us what you are seeing, where and when. Photographs help.
- 2Understanding the symptomsWe ask about the pattern — after rain, in cold weather, worse in one room.
- 3Reviewing what you already haveExisting reports, building surveys or previous quotations are read before the visit.
- 4Choosing the right surveyThe survey type is matched to the problem rather than sold as a package.
- 5Inspecting the propertyInternal and external inspection, moisture and psychrometric readings, photographs.
- 6Considering moisture sourcesConstruction, ground levels, rainwater goods, airflow, heating and occupancy.
- 7Clear written findingsWhat was found, what it means, and where the evidence is inconclusive.
- 8Recommended next stepsIn priority order, with the reasoning behind each recommendation.
- 9Quoting only where work is neededItemised, with assumptions and exclusions stated.
- 10Kept informed throughoutReports, quotations and project updates emailed to you at each stage.
- 11Aftercare and guidanceDrying and decoration advice, maintenance instructions and guarantee details.
Transparent pricing
Damp survey from £114 + VAT
A Damp Proofing Quote Assessment is £114 plus VAT. The fee can be deducted from the final invoice if eligible remedial works proceed, subject to the agreed terms. Other inspection types are priced according to their scope.
Inspection requirements vary between properties, so larger, more complex or commercial buildings are priced according to their scope. You will be told the fee before the visit is confirmed — there are no charges added afterwards.
0% INTEREST. NO FEES.
Spread the cost of your remedial works.
Pay 40% upfront and spread the balance over three or six monthly instalments.
Available on eligible remedial works, subject to assessment and written agreement.
Online tools
Three ways to get a considered answer before anyone visits
Not Sure What Is Causing the Damp?
Answer a few simple questions, upload photographs and receive an initial summary of possible causes and the type of survey that may be appropriate.
- The tool gives preliminary guidance only
- It does not replace an inspection
- Photographs alone cannot confirm a diagnosis
- You provide contact details so the summary can be emailed to you
Already Have a Damp or Property Survey Report?
Upload an existing damp report, building survey, RICS report or property inspection document for an initial AI-assisted summary and recommended next steps.
- The tool summarises the document you submit
- Recommendations are subject to professional review
- You provide contact details to receive the summary
- A site inspection may still be necessary
Request a Written Estimate
Send us the details and photographs of the problem and our team will price the work and put it in writing.
- Prepared by our team, never generated automatically
- Photographs help us price it accurately
- Final prices depend on the inspection findings
- No obligation to proceed
Regional project example
A project from elsewhere in our region
We do not have a published project in Corby yet, so this example is from elsewhere in the area we cover. We will not present work as local when it is not.
Verified customer reviews
What our customers say
“The guys were really polite and friendly, super professional, they did a perfect job but they didn't hang around either, no time wasted! They kept me updated every single step of the job, like letting me know when they were going outside whilst the plaster was drying. I really appreciated the communication. The lads tidied up really nice inside and the boss came back the same day and took all the rubbish away and swept up. Literally couldn't ask for more :)”
“The team at Procure, Cassie and Callum in particular, were both incredibly professional and incredibly kind throughout the whole process: from booking the survey to completing the works, they were flexible, understanding and reliable. They showed good humour while also being experienced and knowledgable, they took their time to explain everything while still making us feel that everything was on our terms. I can't think of a better contractor, I can wholeheartedly recommend.”
“5 Star all the way. Procure are simply the best trade services company we have ever dealt with. From the beginning of the process, Callum (the owner), his office staff and all involved have been courteous, professional and diligent in all communication & contact. We were buying a new house with multiple damp issues. Callum surveyed and advised the best course of action, even recommending cheaper options of repair, where more costly alternatives could easily have been offered. The two days he was on site along with his brother, were very easy. Both were very friendly, polite and most importantly diligent in their work. You could see they took pride in the quality of what they did, going above and beyond what was quoted for, leaving the place as clean as possible behind them. We would have no hesitation recommending Callum and the Procure Team. Book with confidence here”
Every review is from a customer whose work we completed, published as it was written. Read all of our reviews.
Questions
Frequently asked questions — Corby
Is my mould problem the property owners's responsibility or mine?
It depends on the cause, which is exactly why an evidence-led investigation helps. Where mould results from a building defect or inadequate airflow provision, that is a property matter; where it results from how a home is heated and used, practical guidance usually resolves it. Our reports set out the evidence rather than apportioning blame.
Do you carry out work for property owners?
Yes. We provide documented damp and mould investigations with photographic evidence and clear recommendations, which supports relevant housing hazard assessment and applicable damp-and-mould response obligations. We do not guarantee legal compliance — that depends on your own processes.
Will improving airflow increase heating costs?
Well-specified airflow is designed to remove moisture without wasting heat, and we take running costs into account when recommending a system. Living in a mould-free home usually costs less than repeatedly redecorating.
Corby has a lot of post-war steel-industry housing – are these properties particularly prone to damp?
Much of the NN17 and NN18 housing stock was built rapidly during the mid-twentieth century to house steelworkers, often using non-traditional construction methods and materials that are now ageing. Some of these builds have limited cavity detailing or use dense renders that trap moisture. Whether that translates into rising damp, penetrating damp or interstitial condensation depends on the individual property and can only be confirmed through a thorough on-site inspection of the walls, floors and roof junction details.
How do I know whether the damp in my Corby home is condensation or a structural defect?
Condensation typically presents as mould on cold surfaces such as window reveals, external corners and north-facing walls, and often fluctuates with the seasons. A structural defect – such as a failed damp-proof course or penetrating damp through a wall – tends to produce localised tide marks, salting or persistent dampness that does not improve with airflow. The two can appear similar, which is why a diagnostic inspection using calibrated moisture meters and a thermal assessment is the reliable way to distinguish between them before any remedial work is specified.
Related reading
Worth reading before you book in Corby
Written by our surveyors, on the questions we are asked most often.
Nearby
Also serving locations near Corby
We also work in Kettering, Desborough, Rothwell, Oundle, Thrapston and Burton Latimer. For everywhere else we cover, see our Northamptonshire service area.
Written and last reviewed by the Procure Group survey team on .
Accredited & certified
Qualified, accredited
and accountable
Specialist qualifications in damp, timber and mould, independently assessed health and safety, and carded operatives on every site.
Fully insured, including professional indemnity.
- PCAQT
PCA Qualified Technician
CHAS Accredited Contractor
UKAME Accredited
Dewpoint Professional
Construction Skills Certification Scheme
Blue & Gold Skilled Workers
Trade qualifications held
NVQ Level 2
Damp-proofing & wood preservation
NVQ Level 3
Insulation & building treatments
HS&E tested
Health, safety & environment
Next step
Book your damp survey in Corby
Book an inspection, ask for a callback, or use one of the online tools first. Whichever suits you — there is no obligation either way.
Request a callback
Tell us what you are seeing and we will come back to you. Your enquiry is tagged to Corby so the right surveyor picks it up.