Art gallery · St Albans
ISO-Therm internal wall insulation to an art gallery
- Agreed approach
- ISO-Therm internal wall insulation installed throughout the gallery, fitted from scaffold and finished ready for decoration.
Cambridge property ranges from college-era and Victorian buildings to modern high-density flats. Procure Group Ltd investigates damp, mould and condensation across all of it, establishing the cause before recommending any remedial work.



What we investigate
Any one of these symptoms can have several different causes, and the right remedy depends entirely on which one it is. That is what a survey establishes.
Staining at low level or around a specific point on a wall or ceiling.
Black, green or grey growth on walls, ceilings, sealant, window reveals or behind furniture.
A persistent smell, often in a cupboard, cellar or unused room, sometimes before anything is visible.
Blistering, salting, crumbling plaster or wallpaper lifting away from the wall.
Water on glass and frames in the morning, and mould appearing on cold surfaces.
Damp appearing during or after rain, frequently linked to rainwater goods or pointing.
Low-level dampness that may be rising damp, or may be one of several other causes.
Soft or crumbling timber, fungal growth, exit holes or springy floors.
Plumbing, heating or drainage leaks that show up some distance from the source.
Rooms that feel humid, cold spots at reveals and lintels, and extract fans that do not clear steam.
Damp, standing water or high humidity in below-ground space.
Services
Each service below links to the full national service page, where the investigation, the treatment options and the circumstances in which it is not appropriate are set out in detail.
Damp
A structured investigation to establish the likely cause of dampness before any remedial work is recommended.
Damp
Careful assessment of low-level dampness, which is frequently caused by something other than rising damp.
Damp
Investigation of moisture entering through walls, roofs, openings and rainwater goods.
Surveys
Detailed, evidence-led survey reports for owners, landlords, agents and purchasers.
Surveys
Focused assessment of damp and timber concerns raised during a property purchase.
Mould & condensation
Assessment of moisture production, ventilation, heating and insulation to reduce surface condensation.
Mould & condensation
Safe removal of mould growth combined with addressing the moisture source so that it does not return.
Timber
Assessment and treatment of structural timbers affected by moisture, decay or insect attack.
Timber
Establishing whether insect activity is current before recommending any treatment.
Timber
Identifying and repairing timber decay caused by sustained high moisture content.
Timber
Careful investigation of suspected dry rot, which can extend beyond visibly damp timber.
Waterproofing
Design and installation of waterproofing systems for basements and cellars.
Waterproofing
Waterproofing design for below-ground and earth-retaining structures.
Waterproofing
Applied cementitious waterproofing for suitable below-ground and internal applications.
Waterproofing
Drained protection systems that manage water rather than resisting it under pressure.
Repairs & finishes
Replastering specifications appropriate to walls affected by dampness or salt contamination.
Repairs & finishes
Repairs to the external fabric that address the source of moisture entry.
Repairs & finishes
Drying, repair and reinstatement following leaks, escapes of water or flooding.
Repairs & finishes
Insulation of solid walls with careful attention to moisture risk and detailing.
Local property context
Different construction types behave differently when they get wet, so the approach is matched to the building in front of us.
A large proportion of central Cambridge housing is period property in conservation areas, much of it converted into flats or let to students, academics and professionals. Solid brick walls, original lime plaster and later cement renders or impermeable finishes interact in ways that need to be understood before any treatment is specified — an unsuitable render or paint system can trap moisture and make matters worse.
The city also has a great deal of recent high-density development around the station, Eddington and the eastern fringe, where the questions are different: mechanical airflow performance, humidity in compact flats, and cold bridging at junctions. Pre-purchase enquiries are also common here, frequently following a homebuyer report that recommends a specialist damp inspection.
Our approach
The purpose of a survey is to identify the underlying cause of the moisture, not to justify a particular treatment.
Transparent pricing
A Damp Proofing Quote Assessment is £114 plus VAT. The fee can be deducted from the final invoice if eligible remedial works proceed, subject to the agreed terms. Other inspection types are priced according to their scope.
Inspection requirements vary between properties, so larger, more complex or commercial buildings are priced according to their scope. You will be told the fee before the visit is confirmed — there are no charges added afterwards.
Online tools
Answer a few simple questions, upload photographs and receive an initial summary of possible causes and the type of survey that may be appropriate.
Upload an existing damp report, homebuyer report, RICS report or property inspection document for an initial AI-assisted summary and recommended next steps.
Send us the details and photographs of the problem and our team will price the work and put it in writing.
Regional project example
We do not have a published project in Cambridge yet, so this example is from elsewhere in the area we cover. We will not present work as local when it is not.
Art gallery · St Albans
Verified customer reviews
These reviews are from customers elsewhere in the region rather than this town. We publish them as they were given.
Questions
It is very common, and it is often precautionary. A surveyor with limited time and no invasive access will flag elevated readings and recommend a specialist look. Our assessment establishes whether there is a genuine defect, what it will cost to put right, and equally importantly whether extensive damp proofing is unnecessary.
No. Older solid-wall buildings were designed to handle moisture by allowing it to evaporate. Recommendations for these properties need to respect that, and any work to a listed building may require consent. We will set out plainly where that applies.
Yes. Condensation and mould in shared and high-occupancy flats is a significant part of our Cambridge work, and the report gives property owners documented findings and a practical set of measures.
Yes. Upload it for an initial AI-assisted summary followed by surveyor review. It is a sensible step before committing to a substantial damp-proofing quotation.
Many terraced properties in CB1 and CB4 were built in the Victorian and Edwardian periods using solid brick construction without a functional damp-proof course, or with one that has since failed. These walls have limited capacity to shed moisture, and ground levels around the property are often higher than original floor level. Whether rising damp is the confirmed cause of wall staining or deteriorating plaster is always established through inspection and moisture readings before any remedial work is recommended.
Nearby
We also work in Ely, St Ives and Huntingdon. For everywhere else we cover, see our Cambridgeshire service area.
Next step
Book an inspection, ask for a callback, or use one of the online tools first. Whichever suits you — there is no obligation either way.
Tell us what you are seeing and we will come back to you. Your enquiry is tagged to Cambridge so the right surveyor picks it up.
Your cookie choices
We use essential cookies to make this website work. With your permission we also use Google Ads cookies to measure how many people book an inspection after seeing one of our adverts. We do not use cookies to profile you or sell your details, and you can change your mind at any time. Cookie Policy · Privacy Policy